Combined composites based on polylactide 3D materials and polyurethane

Keywords

polyurethane resin, FDM 3D printing, starch, epoxidized soybean oil combined, composite, hardness, modification.

Cite as

Levytskyi V. Ye., Masyuk A. S., Katruk D. S., Kechur D. І., Bilyi L. M., and Humenetskyi T. V. Combined composites based on polylactide 3D materials and polyurethane. Physicochemical Mechanics of Materials. 2024. 60(6), 051-057.

https://doi.org/10.15407/pcmm2024.06.051

Abstract

The peculiarities of obtaining combined products based on thermoplastic polylactide matrices and thermoreactive polyurethane resin were investigated. Depending on the component and quantitative composition, the factors affecting the physicomechanical properties of the obtained composites were identified. In particular, an increase in Brinell hardness and impact toughness of 3D matrices filled with resin was noted. The pile-up parameter for the developed materials is determined. The effect of modifiers – native starch and epoxidized soybean oil – on the elastoplastic properties and hardness of polyurethane resin was studied.

References

1. L. Zhou, J. Miller, J. Vezza, M. Mayster, M. Raffay, Q. Justice, Z. Al Tamimi, G. Hansotte, L. D. Sunkara, and J. Bernat, “Additive manufacturing: a comprehensive review,” Sensors, 24, Is. 9, (2024). Article number 2668. https://doi.org/10.3390/s24092668
2. Gulnaaz Rasiya, Abhinav Shukla, and Karan Saran, “Additive manufacturing: a review,” Mater. Today: Proc., 47, Is. 19, 6896-6901 (2021). https://doi.org/10.1016/j.matpr.2021.05.181
3. C. Chiujdea, and S. Cananau, “A Review of additive manufacturing technologies,” J. of Res. and Innovation for Sustainable Soc., 3, Is. 25 (2021). https://doi.org/10.33727/JRISS.2021.1.4:25-32
4. Z. Wang, and Y. Yang, “Application of 3D printing in implantable medical devices, “BioMed Res Int., 6 (2021). Article number 6653967. https://doi.org/10.1155/2021/6653967
5. S. C. Ligon, R. Liska, J. Stampfl, M. Gurr, and R. Mülhaupt, “Polymers for 3D printing and customized additive manufacturing,” Chem. Rev., 117, Is. 15, 10212-10290 (2017). Article number 10212. https://doi.org/10.1021/acs.chemrev.7b00074
6. O. Stava, J. Vanek, B. Benes, N. Carr, and R. Mech, “Stress relief: improving structural strength of 3D printable objects,” ACM Trans. on Graph., 31, Is. 4, 48:1-48:11 (2012). https://doi.org/10.1145/2185520.2335399
7. M. S. Hossain, J. Ramos, D. Espalin, M. Perez, and R. Wicker, “Improving tensile mechanical properties of FDM-manufactured specimens via modifying build parameters,” Int. Solid Freeform Fabrication Symp.: An Additive Manufact., University of Texas at Austin, 380-392 (2013).
8. J. T. Belter, and A. M. Dollar, “Strengthening of 3D printed fused deposition manufactured parts using the fill compositing technique,” PLoS ONE, 10, Is. 4, 1-19 (2015). https://doi.org/10.1371/journal.pone.0122915
9. A. Atiqah, M. T. Mastura, B. A. Ahmed Ali, M. Jawaid, and S. Sapuan, “A Review on polyurethane and its polymer composites. current organic synthesis, “Bentham Sci. Publ., 14, Is. 2, 233-248 (2017). https://doi.org/10.2174/1570179413666160831124749
10. Gang Huang, Tianhong Yang, Zhaoyi He, Le Yu, and Haixin Xiao, “Polyurethane as a modifier for road asphalt: A literature review,” Construction and Building Mater., 356 (2022). Article number 129058. https://doi.org/10.1016/j.conbuildmat.2022.129058
11. V. Levytskyi, D. Katruk, A. Masyuk, T. Bialopiotrowicz, M. Bratychak, and N. Chopyk, “The effect of poly(vinyl chloride) modifier and filler nature on properties of polyester composites,” Chemistry & Chemical Techn., 12, Is. 1, 53-57 (2018). https://doi.org/10.23939/chcht12.01.053
12. V. Levytskyi, A. Masyuk, D. Katruk, and M. Bratychak, “Regularities of obtaining, morphology and properties of metal-containing polymer-silicate materials and polyester composites on their basis,” Chemistry & Chemical Techn., 10, Is. 1, 35-40 (2016). https://doi.org/10.23939/chcht10.01.035
13. Deepa Ahirwar, Amit Telang, Rajesh Purohit, and Anurag Namdev, “A short review on polyurethane polymer composite,” Materials Today: Proc., 62, Part 6, 3804-3810 (2022). https://doi.org/10.1016/j.matpr.2022.04.481
14. D. Katruk, V. Levytskyi, Ul. Khromyak, V. Moravskyi, and A. Masyuk, “Physicochemical principles of synthesis and modification of unsaturated polyester-polyvinyl chloride composites and the properties of materials derived from them, international,” J. of Polymer Sci. (2019). Article number 2547384. https://doi.org/10.1155/2019/2547384
15. O. Mukbaniani, T. Tatrishvili, Marc J. M. Abadie (editors), Advanced Polymer Structures Chemistry for Engineering Applications, Imprint Apple Acad. Press., New York (2023). https://doi.org/10.1201/9781003352181