ISSN 0430-6252. Physicochemical Mechanics of Materials. 2023.
Volume 59, Issue 3

Aluminum alloy corrosion inhibition with a composition of guar gum and potassium sorbate

Keywords

aluminium alloy, corrosion inhibition, chloride solution, guar gum, potassium sorbate.

Cite as

Khlopyk O. P., Zin I. M., Tymus M. B., Holovchuk M. Ya., and Kalakhan O. S. Aluminum alloy corrosion inhibition with a composition of guar gum and potassium sorbate. Physicochemical Mechanics of Materials. 2023. 59(3), 31-36.

https://doi.org/10.15407/pcmm2023.03.031

Abstract

High efficiency of corrosion inhibition of aluminum alloy in a 0.1% NaCl solution by the composition of guar gum and potassium sorbate was established. The formation of an organic adsorption film was found on the surface of the metal samples. The degree of metal protection against corrosion by this inhibitory composition is more than 90%. The results of the research can be used for the development of eco-friendly “green” corrosion inhibitors of aluminum alloys from renewable plant materials.

References

  1. S. A. Umoren, and M. M. Solomon, “Recent developments on the use of polymers as corrosion inhibitors-a review,” Open Mat. Sci. J., 8, Is.1, 39-54 (2014). https://doi.org/10.2174/1874088X01408010039
  2. S. A. Korniy, I. M. Zin, M.-O. M. Danyliak, and Y. Y. Rizun, “Eco-friendly metal corrosion nihibitors based on natural polymers (A Review),” Mater. Sci., 58, No. 5, 567-578 (2023). https://doi.org/10.1007/s11003-023-00700-7
  3. M. Abdallah, “Guar gum as corrosion inhibitor for carbon steel in sulphuric acid solutions,” Portugaliae Electrochimica Acta, 22, Is. 2, 161-175 (2004). https://doi.org/10.4152/pea.200402161
  4. S. A. Korniy, I. M. Zin, M. B. Tymus, O. P. Khlopyk, and M.-O. M. Danyliak, “Corrosion protection of carbon steel by a composition based on natural polysaccharide,” Mater. Sci., 56, No. 5, 602-607 (2021). https://doi.org/10.1007/s11003-021-00470-0
  5. M. Mobin, and M. Rizvi, “Adsorption and corrosion inhibition behavior of hydroxyethyl cellulose and synergistic surfactants additives for carbon steel in 1 M HCl,” Carbohydrate Polymers, 156, 202-214 (2017). https://doi.org/10.1016/j.carbpol.2016.08.066
  6. M. B. Tymus, I. M. Zin, O. P. Khlopyk, V. I. Pokhmurskii, M. Y. Holovchuk, and S. A. Korniy, “Corrosion inhibition of aluminum alloy by a composition of guar gum and tartrate,” Mater. Sci., 57, No. 5, 679-687 (2022). https://doi.org/10.1007/s11003-022-00595-w
  7. E. Abelev, D. Starosvetsky, and Y. Ein-Eli, “Potassium sorbate-A new aqueous copper corrosion inhibitor. Electrochemical and spectroscopic studies,” Electrochimica Acta, 52, Is. 5, 1975-1982 (2007). https://doi.org/10.1016/j.electacta.2006.08.012
  8. D. Gelman, D. Starosvetsky, and Y. Ein-Eli, “Copper corrosion mitigation by binary inhibitor compositions of potassium sorbate and benzotriazole,” Corros. Sci., 82, 271-279 (2014). https://doi.org/10.1016/j.corsci.2014.01.028
  9. A. S. Bondarenko, and G. A. Ragoisha, in: A. L. Pomerantsev (Ed.), Progress in Chemometrics Research, Nova Science Publ., New York (2005), pp. 89-102.
  10. L. Hamadou, L. Aïnouche, A. Kadri, S. A. A. Yahia, and N. Benbrahim, “Electrochemical impedance spectroscopy study of thermally grown oxides exhibiting constant phase element behaviour,” Electrochimica Acta, 113, 99-108 (2013). https://doi.org/10.1016/j.electacta.2013.09.054
  11. Y. Fernine, E. Ech-chihbi, N. Arrousse, F. El Hajjaji, F. Bousraf, M. Ebn Touhami, Z. Rais, and M. Taleb, “Ocimum basilicium seeds extract as an environmentally friendly antioxidant and corrosion inhibitor for aluminium alloy 2024 -T3 corrosion in 3 wt% NaCl medium,” Colloids and Surfaces A: Physicochemical and Engineering Aspects, 627, art. no. 127232 (2021). https://doi.org/10.1016/j.colsurfa.2021.127232
  12. J. Wang, P. Somasundaran, and D. R. Nagaraj, “Adsorption mechanism of guar gum at solid-liquid interfaces,” Minerals Eng., 18, Is. 1, 77-81 (2005). https://doi.org/10.1016/j.mineng.2004.05.013
  13. A. J. Scott, L. R. Zeron, and A. Penlidis, “Evaluation of polymeric materials for chemical enhanced oil recovery,” Processes, 8, Is. 3, art. no. 361 (2020). https://doi.org/10.3390/pr8030361