ISSN 3041-1815. Physicochemical Mechanics of Materials. 2024.
Volume 60, Issue 5

Anti-corrosion properties of composite inhibiting pigment based on natural calcium silicate and zinc monophosphate in alkyd coating on carbon steel

Keywords

corrosion of steel, natural calcium silicate, zinc monophosphate, anticorrosion pigment, slightly acidic atmospheric precipitations, potentiodynamic polarization, impedance spectroscopy, scanning electron microscopy.

Cite as

Khlopyk O. P., Zin I. M., Korniy S. A., Datsko B. M., and Bilyi L. M. Anti-corrosion properties of composite inhibiting pigment based on natural calcium silicate and zinc monophosphate in alkyd coating on carbon steel. Physicochemical Mechanics of Materials. 2024. 60(5), 045-053.

https://doi.org/10.15407/pcmm2024.05.045

Abstract

A composite inhibiting pigment based on natural calcium silicateand zinc monophosphate was obtained by mechanochemical modification. Pigment extracts reduce the corrosion current density and increase the resistance to charge transfer of carbon steel in the slightly acidic atmospheric precipitations due to the formation of a protective film on its surface. The presence of phosphorus, zinc, and calcium was found in the composition of this film, which indicates the formation of phosphates. Adding a composite pigment to the priming layer of the alkyd coating significantly increases its corrosion resistance compared to the uninhibited sample. The obtained composite pigment has increased protective properties in the slightly acidic atmospheric precipitations and is promising for use in paint coatings on carbon steels.

References

  1. S. B. Lyon, R. Bingham, and D. J. Mills, “Advances in corrosion protection by organic coatings: What we know and what we would like to know,” Progress in Organic Coatings, 102, 2-7 (2017). https://doi.org/10.1016/j.porgcoat.2016.04.030
  2. O. Gharbi, S. Thomas, C. Smith, and N. Birbilis, “Chromate replacement: what does the future hold ?,” NPJ Materials Degradation, 2, Is. 1 (2018). Article number 12. https://doi.org/10.1038/s41529-018-0034-5
  3. S. Korniy, M.-O. Danyliak, and I. Zin, “Zeolite-based anti-corrosion pigments for polymer coatings: A brief review,” Adv. in Polymer Technol. (2024). Article number ID 6533170. https://doi.org/10.1155/2024/6533170
  4. D. M. Lenz, M. Delamar, and C. A. Ferreira, “Improvement of the anticorrosion properties of polypyrrole by zinc phosphate pigment incorporation,” Progress in Organic Coatings., 58, Is. 1, 64-69 (2007). https://doi.org/10.1016/j.porgcoat.2006.12.002
  5. C. H. Hare, “Corrosion control of steel by organic coatings,” in: Uhlig’s Corrosion Handbook (2011), pp. 971-983. https://doi.org/10.1002/9780470872864.ch67
  6. A. Hussain, and S. Lyon, “Evaluating novel inhibitor pigment blends using electrochemical scanning techniques (EIS, SVET and SKP),” J. of Polymer Composites, 1, Is. 1, 6-16 (2013).
  7. Akira Matsuzaki, Masayasu Nagoshi, Hisato Noro, Masaaki Yamashita, and Nobuyoshi Hara, “Self-healing ffect by zinc phosphate and calcium silicate included in organic-inorganic composite coating on 55% Al-Zn coated steel sheet,” Mater. Transact., 52, Is. 6, 1244-1251 (2011). https://doi.org/10.2320/matertrans.M2010290
  8. N. M. Ahmed, M. G. Mohamed, and M. R. Mabrouk, “Study on the anticorrosive behavior of new core-shell pigments for protection of reinforced concrete steel in sulfate environment,” Construction and Building Mater., 118, 226-234 (2016). https://doi.org/10.1016/j.conbuildmat.2016.05.047
  9. A. Kalendová, and D. Vesely, “Study of the anticorrosive efficiency of zincite and periclasebased core-shell pigments in organic coatings,” Progress in Organic Coatings, 64, 5-19 (2009). https://doi.org/10.1016/j.porgcoat.2008.07.003
  10. O. P. Khlopyk, I. M. Zin, B. M. Datsko, L. M. Bilyi, Z. A. Duriagina, and S. A. Korniy, “Anticorrosion properties of composite inhibiting pigment based on natural calcium silicate and zinc monophosphate,” Mater. Sci., 59, No. 2, 234-241 (2023). https://doi.org/10.1007/s11003-024-00768-9
  11. D. Battocchi, A. M. Simoes, D. E. Tallman, and G. P. Bierwagen, “Comparison of testing solutions on the protection of Al-alloys using a Mg-rich primer,” Corr. Sci., 48, Is. 8, 2226-2240 (2006). https://doi.org/10.1016/j.corsci.2005.05.059
  12. I. M. Voloshyn, and O. R. Sobechko, Acid Precipitation of the city of Lviv: their Chemistry, Metallization of Natural Components [in Ukrainian], Lvivskyi Derzhavnyi Universytet Fizychnoi Kultury, Lviv (2013).
  13. S. A. Korniy, I. M. Zin, M.-O. M. Danyliak, O. P. Khlopyk, and B. M. Datsko, “Corrosion inhibition of low-alloy steel by a composite pigment based on zeolite and monocalcium phosphate,” Mater. Sci., 58, No. 2, 261-267 (2022). https://doi.org/10.1007/s11003-022-00658-y
  14. G. A. Ragoisha, and A. S. Bondarenko, “Potentiodynamic electrochemical impedance spectroscopy,” Electrochimica Acta, 50, 1553-1563 (2005). https://doi.org/10.1016/j.electacta.2004.10.055
  15. Y. Zuo, R. Pang, W. Li, J. P. Xiong, and Y. M. Tang, “The evaluation of coating performance by the variations of phase angles in middle and high frequency domains of EIS,” Corr. Sci., 50, Is. 12, 3322-3328 (2008). https://doi.org/10.1016/j.corsci.2008.08.049