Determination of thermostressed state of cylindrical bodies with multilayer inhomogeneous coatings

Keywords

solid cylinder, inhomogeneous multilayer coatings, thermal stress state, integral equations, analytical solutions, thick coatings.

Cite as

Kalynyak B. М., and Shevchuk V. А. Determination of thermostressed state of cylindrical bodies with multilayer inhomogeneous coatings. Physicochemical Mechanics of Materials. 2025. 61(1), 109-117.

DOI: https://doi.org/10.15407/pcmm2025.01.109

Abstract

The method of determining the thermal stress state in a long cylinder with the inhomogeneous in the radial direction multilayer coating under a constant force surface load and a given temperature field is proposed. The corresponding problem of uncoupled thermoelasticity in terms of stresses is reduced by direct integration of the equations of equilibrium and compatibility to a set of integral equations relative to radial stresses and the sum of radial and circular stresses. The approximate analytical solutions to these integral equations were obtained taking into account the thinness of each coating layer. The method was verified by comparison with the results obtained from the exact solutions of the cor­responding thermoelasticity problem for the power-law dependence of the thermomechanical characteristics of the coating materials on the radial variable. The method can be applied to determine the thermal stress state of the relatively thick coatings which consist of a large number of thin ones.

References

1. A. M. Afsar, J. Go, and J. I. Song, “A mathematical analysis of thermoelastic charac-teristics of a rotating circular disk with an fgm coating at the outer surface,” Adv. Compos. Mater., 19, Is. 3, 269-288 (2010). https://doi.org/10.1163/092430410X490482
2. R. Kulchytsky-Zhyhailo, S. J. Matysiak, and A. S. Bajkowski, “Semi-analytical solution of three-dimensional thermoelastic problem for half-space with gradient coating,” J. Therm. Stresses, 41, Is. 9, 1169-1181 (2018). https://doi.org/10.1080/01495739.2018.1460227
3. H. M. Shodja, H. Haftbaradaran, and M. Asghari, “A thermoelasticity solution of sandwich structures with functionally graded coating,” Compos. Sci. Technol., 67, Is. 6, 1073-1080 (2007). https://doi.org/10.1016/j.compscitech.2006.06.001
4. Q. Yang, and C.-F. Gao, “Analysis of thermal stress in a functionally graded coating on a para¬bolic substrate,” J. Therm. Stresses, 36, Is. 11, 1141-1155 (2013). https://doi.org/10.1080/01495739.2013.818898
5. J. Zhao., Y. Li, and X. Ai, “Analysis of transient thermal stress in sandwich plate with functio¬nally graded coatings,” Thin Solid Films, 516, Is. 21, 7581-7587 (2008). https://doi.org/10.1016/j.tsf.2008.03.028
6. Y. Ootao, “Transient thermoelastic analysis for a multilayered hollow cylinder with piecewise power law nonhomogeneity,” J. Solid Mech. Mater. Eng., 4, Is. 8, 1167-1177 (2010). https://doi.org/10.1299/jmmp.4.1167
7. Y. Ootao, “Transient thermoelastic analysis for a multilayered hollow sphere with piecewise power law nonhomogeneity,” Compos. Struct., 93, Is. 7, 1717-1725 (2011). https://doi.org/10.1016/j.compstruct.2010.12.008
8. Y. Ootao, “Transient thermoelastic analysis for a multilayered thick strip with piecewise exponential nonhomogeneity,” Compos. B: Eng., 42, Is. 4, 973-981 (2011). https://doi.org/10.1016/j.compositesb.2010.12.011
9. B. V. Protsyuk, “Static thermoelasticity problems for a layered functional-gradient thermosensitive cylinder,” Matematyhni Metody ta Fisyko-Mekhanichi Polya [in Ukrainian], 64, Is. 2, 70-81 (2021). https://doi.org/10.15407/mmpmf2021.64.2.70-81
10. V. A. Shevchuk, “Analysis of the stressed state of bodies with multilayer thin coatings,” Strength Mater., 32, Is. 1, 92-102 (2000). https://doi.org/10.1007/BF02511512
11. V. A. Shevchuk, “Methodology of investigations of the thermal stressed state of bodies with thin multilayer coatings,” Math. Sci., 278, Is. 5, 780-794 (2024). https://doi.org/10.1007/s10958-024-06961-0
12. V. A. Shevchuk, and B. M. Kalynyak, “Stressed state of cylindrical bodies with multilayer inhomogeneous coatings,” Mater. Sci., 46, Is. 6, 747-756 (2011). https://doi.org/10.1007/s11003-011-9348-y
13. V. M. Vihak, and B. M. Kalynyak, “Reduction of one-dimensional elasticity and thermoelasticity problems for inhomogeneous and thermosensitive bodies to integral equations of the second kind,” Dopovidi Akademii Nauk Ukrainy [in Ukrainian], Is. 11, 60-67 (1998).
14. Y. Tokovyy, and C.-C. Ma, The Direct Integration Method for Elastic Analysis of Nonhomogeneous Solids, Newcastle Cambridge Scholars Publishing (2021).