Volume 58, Issue 6

Andreikiv O. Ye., Dolinska I. Ya., and Zviagin N. S.

Acoustic-emission method of determining residual life of thin-walled structural elements under the action of force loads and corrosive environments

Kuryliak D. B., Nazarchuk Z. T., Voytko M. V., and Kulynych Ya. P.

SH-wave diffraction on a thin interface finite defect in the joint of an elastic layer and a half-space

Savruk M. P., Kazberuk A., Kravets V. S., and Chornenkyi A. B.

Stress state of an ortthotropic plate at the holes with sharp and rounded tips

Melnyk I. V., Stashchuk M. H., Hohol M. V., Prystavskyi T. V., Ivasyk H. V., and Partuta V. P.

Methodology of calculation and experimental verification of rigidity of reinforced concrete structures with unidirectional cavities

Pasternak Ia. M., Sulym H. T., Vasylyshyn A. V., and Iasniy O. P.

The influence of interfacial layers of high thermal conductivity on the distribution of physical and mechanical fields in two-component structures

Gubenko S. I. and Parusov E. V.

The influence of eutectic-type inclusions on the red brittleness of steels

Husarova І. О., Solodkyi Ye. V., Manko T. А., and Loboda P. І.

Ceramics based on reaction-bonded boron carbide for heat protection coatings of space aircraft

Narivskyi O. E., Subbotin S. O., Pulina T. V., Leoshchenko S. D., Khoma M. S., and Ratska N. B.

Modeling of pitting of heat exchangers made of 18/10 type steels in circulating water

Martínez-Galván Y., Dzib-Pérez L., García-Rentería M., Bilyy O., López-Morelos V., and Gonzalez-Sanchez J.

Effect of temperature on resistance to pitting corrosion in duplex stainless steel 2205 welds

Kuskov Yu. M., Student M. M., Bohaichuk I. L., Kaida T. V., Zadorozhna Kh. R., and Veselivska H. H.

Corrosion-active non-metallic inclusions in deposited metal from powder-coated 30Kh20MN wire under AN-26 flux

Kopei B. V., Krechkovska H. V., Kopei I. B., and Bakun B. N.

Specific features of corrosion-fatigue fracture of steel and hybrid pump rods

Kostin V. А., Laukhin D. V., and Nyrkova L. I.

Cracking of the concrete matrix in reinforced concrete due to the pressure of corrosion products of the reinforcement

Pohrelyuk I. M., Tkachuk O. V., Proskurnyak R. V., Kuznetsov O. V., and Gnilitskyi Ya. M.

Morphology and corrosion properties of hydroxyapatite coatings formed on VT6 pre-nitrided titanium alloy

Vlad Kh. I., Verbovytskyy Yu. V., Bogatyrov V. M., and Zavaliy I. Yu.

Structure and electrochemical charge-discharge properties of Ni–Co–C nanocomposites

Kyryliv V. I., Zakiev V. I., and Maksymiv O. V.

Change in the modulus of elasticity of the surface nanostructured layer on U8 steel

Lyubymenko О. М.

Specific features of change of the plate shape in the formation of gradient alloys of palladium with hydrogen

Holubets V. M., Hvozdetskyi V. M., Pashechko M. I., and Shpuliar Yu. S.

The influence of electrospark coatings of tool on the strength indicators of milling of wooden materials

Pawandeep Kaur and Jaspal Singh.

Properties of metakaolin-based geopolymer mortar incorporated with multi-walled carbon nanotubes