2025 year

Berezovets V. V., Kononiuk O. P., Vlad Kh. I., and Zavaliy I. Yu.

Hydrogenation and hydrolysis properties of Mg/MgH2–Fe100–xNixOy composites

Ivanytskyi Ya. L., Maksymenko O. P., Shtayura S. Т., Hrynenko М. V., Yadzhak N. S.

Influence of prior deformation and hydrogenation on deformability of shell structures

Mokryy O. M.

Study of the influence of corrosion on the surface layer of low-carbon steel by means of Rayleigh acoustic waves

Lopachak M. M. and Boichyshyn L. M.

Influence of alloying elements on the electrochemical behaviour of cobalt Co–Si–B–Fe–Cr amorphous-nanocrystalline alloys in a 1 M OH solution

Sirak Ya. Ya., Posuvailo V. М., Veselivska H. H., and Shpuliar Yu. S.

Plasma-electrolytic oxidation of titanium alloys (A review)

Chuchman M. R., Ivashkiv V. R., Khoma M. S., Vynar V. A., Vasyliv Ch. B., Ratska N. B., and Vasyliv O. M.

Influence of oxygen content on tribocorrosion of 17Mn1Si steel in a hydrogen sulfide environment

Tymus M. B., Zin I. M., Korniy S. A., and Fedoriv V. I.

Eco-friendly starch-based inhibitory composition for corrosion protection of reinforced concrete structures in weakly alkaline environments

Student М. М., Pohrelyuk І. М., Luk’yanenko A. G., Student О. Z., Zadorozhna Kh. R., and Hvozdetskyi V. М.

Improvement of the tribological characteristics of VT6 titanium alloy surface layers by diffusion saturation with interstitial elements

Dmytrakh I. M., Syrotyuk A. M., Ovsyanykov V. V., and Leshchak R. L.

Influence of expansion level on base metal mechanical properties of welded straight seam L450M steel pipes

Gubenko S. I.

Features of crack growth at the non-metallic inclusions in steels

Stankevych V. Z., Stankevych O. M., and Babyak M. O.

Time-harmonic vibrations of a two-layer composite with a crack

Uchanin V. M.

Determination of the length of cracks by characteristic points of the eddy current probe signal distribution

Andreikiv O. Ye., Dolinska I. Ya., and Skalskyi Т. V.

Calculation of the life of long steam turbine blades containing small cracks

Ivasenko I. B., Berehulyak O. R., Vorobel R. A., Voronyak T. I., and Stasyshyn I. V.

Method of digital processing of deformed surface interferograms for estimating Poisson’s ratio

Yuzefovych R. М., Javorskyj I. М., Torba Yu. І., Sbrodov Ye. V., Lychak O. V., and Komarnytskyi B. R.

Power estimation of the deterministic component of gas turbine engine vibration during balancing

Kryven’ V. A.

Merging of two collinear shear cracks in a perfectly elastic-plastic body under quasi-static loading

Hrudz V. Ya., Hrudz Ya. V., Dzyubyk А. R., Kapushchak Ya. S., Korendiy V. М., Trush V. S., Stasiuk R. B., and Trush K. V.

Assessment of natural gas quality by combustion materials temperature

Prygunova А. G., Petrov S. S., Aiupova T. A., and Prygunov S. V.

Structure formation of a hypereutectic Al–Si alloy during rapid cooling of a deformed melt

Verbovytskyy Yu. V., Zavaliy I. Yu., and Zasadnyy T. M.

Electrochemical charge-discharge characteristics of composites based on Mg2Ni/Mg and transition metals

Halaichak S. A., Korniy S. A., Zakiev V. I., Vynar V. A., Danilchuk M. V., Chuchman M. R., and Mardarevych R. S.

Corrosion resistance, wear resistance and tribocorrosion of Ni–Mo–B electrodeposited coatings