2024 year

Marchuk I. E., Zavaliy I. Yu., and Zasadnyy T. M.

Hydrogenation of nickel and Ni-based materials (A review)

Vedel D. V., Mazur P. V., Grigoriev O. M., Kozak I. V., Melakh L. M., Naumenko M. P., Karpets M. V., Skoryk M. A., Kozin R. V., and Zavdoveev A. V.

Conditions of solid solution formation in (Ti, Zr, Hf)B2, (Zr, Hf, Nb)B2 and (Zr, Hf, Ta)B2 systems

Nazarchuk Z. T., Voytko M. V., Kuryliak D. B., and Kulynych Ya. P.

Interaction of SH-wave with a semi-infinite crack in an elastic layer

Ivanytskyi Ya. L., Melnyk I. V., Partuta V. P., Maksymenko O. P., Prystavskyi T. V., and Kovalchuk V. V.

Determination of concrete deformations on the surface of cross-compressed reinforced concrete beams using the digital image correlation method

Vakhula O. M. and Yatsiuk R. A.

Study of the influence of the super plasticizer of the polycarboxylate type MasterSure HES 1515 on the physicomechanical properties of high-strength concretes

Sylovanyuk V. P., Melnyk V. O., and Didukh A. I.

Antiplane deformation of an anisotropic elastoplastic body with a filled crack

Levytskyi V. Ye., Masyuk A. S., Katruk D. S., Kechur D. І., Bilyi L. M., and Humenetskyi T. V.

Combined composites based on polylactide 3D materials and polyurethane

Zvirko O. I., Tsyrulnyk O. T., Krechkovska H. V., Venhryniuk O. I., and Nykyforchyn H. M.

The influence of the crack morphology caused by delaminations in the used ferrite-pearlite steel on its fracture toughness

Kipnis A. L.

Investigation of compression of a piecewise homogeneous half-plane with a fixed boundary along an interface crack

Trush V. S., Korendiy V. М., Kachur O. Yu., Zakharov V. M., Trush K. V., and Kravchyshyn T. M.

The influence of vibration lapping parameters of flat surfaces on their roughness

Chumalo H. V., Mozola N. Z., Artym T. I., Yurkevych R. M., and Topchiy V. I.

Use of the method of electric arc spraying of coatings for the restoration of machine parts and structures

Samotugina Yu. S.

Evolution of high-carbon steel structure under plasma modification

Halaichak S. A., Korniy S. A., Datsko B. M., Danilchuk M. V., and Chuchman M. R.

Properties of nickel-based galvanic coatings as hydrogen evolution electrodes

Musii R. S. and Klapchuk M. I.

Thermodeformed state of aluminum plate during induction heat treatment

Lavrys S. M., Pohrelyuk I. M., Sheykin S. Ye., and Rostotskyi I. Yu.

The influence of the initial structure of high-strength titanium alloy on surface hardening and roughness after ball burnishing

Klimenko I. O., Belous V. A., Podhurska V. Ya., Shved M. M., Tolmachova G. M., Kolodiy I. V., Ovcharenko V. D., Ishchenko M. G., Babayev I. M., and Kuprin O. S.

Structure and tribological properties of MоN vacuum-arc coatings

Maksуmova S. V., Zvolinskyy I. V., Chervyakov M. O., Sukhoyarskyi V. E., and Ivanchenko E. V.

Analysis of thermal cycles during soldering and welding of 08kp steel

Shapovalov V. O., Protokovilov I. V., Porokhonko V. B., and Marynenko S. Yu.

Titanium electroslag welding under electromagnetic influence on weld metal crystallization

Dmytrakh І. М., Syrotyuk А. М., Krasiuk O. P., Bolkot P. А., Tsyrulnyk О. Т., Leshchak R. L., Malyuk V. М., and Brychynskyy О. V.

Specific features of fragmentation of hydrogen-charged 60S2A steel during static explosion tests

Khoma M. S., Chuchman M. R., Vasyliv Kh. B., Ratska N. B., and Koval’chyk Yu. I.

The methods of investigation of oxygen influence on corrosion and hydrogenation of pipe steel in hydrogen sulfide environments