ISSN 3041-1815. Physicochemical Mechanics of Materials. 2026.
Volume 62, Issue 3

Corrosion resistance of titanium and its alloys in sodium chloride solutions

Stechyshyn M. S. ORCID
Khmelnytskyi National University, Khmelnytskyi, Ukraine. (https://ror.org/04r8a1r80)
Skyba M. Ye. ORCID
Khmelnytskyi National University, Khmelnytskyi, Ukraine. (https://ror.org/04r8a1r80)
Martyniuk A. V. ORCID
Khmelnytskyi National University, Khmelnytskyi, Ukraine. (https://ror.org/04r8a1r80)
Fedoriv V. M. ORCID
Khmelnytskyi National University, Khmelnytskyi, Ukraine. (https://ror.org/04r8a1r80)
Zdorenko D. V. ORCID
Khmelnytskyi National University, Khmelnytskyi, Ukraine. (https://ror.org/04r8a1r80)
Hordieiev A. I. ORCID
Khmelnytskyi National University, Khmelnytskyi, Ukraine. (https://ror.org/04r8a1r80)
Boikо Yu. І. ORCID
National University of Food Technologies, Kyiv, Ukraine (https://ror.org/03sgk3c38)

Keywords

nitriding, corrosion, cavitation, titanium alloys.

Cite as

Stechyshyn M. S., Skyba M. Ye., Martyniuk A. V., Fedoriv V. M., Zdorenko D. V., Hordieiev A. I., and Boikо Yu. І. Corrosion resistance of titanium and its alloys in sodium chloride solutions. Physicochemical Mechanics of Materials. 2026. 62(3), 23-30.

Abstract

Corrosion resistance of titanium and its alloys in sodium chloride solutions of various concentrations was investigated. The influence of cavitation-erosion wear on the mechanical and electrochemical properties of the studied materials was found. The corrosion rate and wear resistance of metals in neutral and aggressive environments were assessed using potentiodynamic testing and corrosion tests. The results of the study indicate the feasibility of using titanium alloys in the production of equipment for the food industry and other industries operating in corrosive environments.

References

  1. A.I. Khorev, and M.A. Khorev, “Titanium alloys: applications and prospects of development,” Titan, 1, 40-53 (2005).
  2. V.I. Pokhmurskii, and M.S. Khoma, Corrosion Fatigue of Metals and Alloys [in Ukrainian], Spolom, Lviv (2008).
  3. S. Lavrys, O. Tkachuk, I. Pohrelyuk, K. Morgiel, D. Toboła, and J. Morgiel, “Effect of combined strengthening heat treatment with gas nitriding on microstructural evolution of VT22 titanium alloy,” J. of Alloys and Compounds, 1047, Art. no. 184770 (2025). https://doi.org/10.1016/j.jallcom.2025.184770
  4. G.E. Lazarev, “Wear resistance of materials during friction in corrosive media”, Chem. and Petrol. Eng., 10, 647-649 (1974). https://doi.org/10.1007/BF01155343
  5. M.S. Stechyshyn, N.M. Stechyshyna, O.V. Dykha, A.V. Martynyuk, V.V. Liukhovets, and M.V. Lukyanyuk, “Corrosion-mechanical wear of nitrided steels in acidic medium,” Mater. Sci., 58, Is. 5, 597-601 (2023). https://doi.org/10.1007/s11003-023-00704-3
  6. J. Basumatary, and R.J.K. Wood, “Synergistic effects of cavitation erosion and corrosion for nickel aluminium bronze with oxide film in 3.5% NaCl solution,” Wear, 376-377, 1286-1297 (2017). https://doi.org/10.1016/j.wear.2017.01.047
  7. M. Student, I. Pohrelyuk, J. Padgurskas, V. Posuvailo, V. Hvozdets’kyi, Kh. Zadorozhna, H. Chumalo, H. Veselivska, I. Kovalchuk, and A. Kychma, “Influence of plasma electrolytic oxidation of cast Al-Si alloys on their phase composition and abrasive wear resistance,” Coatings, 13, Is. 3, Art. no. 637 (2023). https://doi.org/10.3390/coatings13030637
  8. M. Student, V. Gvozdetsky, O. Student, O. Prentkovskis, P. Maruschak, O. Olenyuk, and L. Titova, “The effect of increasing the air flow pressure on the properties of coatings during the arc spraying of cored wires,” Strojnicky Casopis, 69, Is. 4, 133-146 (2019). https://doi.org/10.2478/scjme-2019-0048
  9. M.S. Stechyshyn, A.V. Martynyuk, Yu.M. Bilyk, V.P. Oleksandrenko, and N.M. Stechyshyna, “Influence of the ionic nitriding of steels in glow discharge on the structure and properties of the coatings”, Mater. Sci., 53, Is. 3, 343-350 (2017). https://doi.org/10.1007/s11003-017-0081-z
  10. I.M. Dmytrakh, and V.V. Panasyuk, Influence of Corrosive Environments on Local Fracture of Metals at Stress Concentrators [in Ukrainian], Karpenko Physico-Mechanical Institute of the National Academy of Sciences of Ukraine, Lviv (1999).
  11. Stefano Rossi, Sergio Maria Leso, and Massimo Calovi, “Study of the corrosion behavior of stainless steel in food industry,” Materials, 17, Is. 7, Art. no. 1617 (2024). https://doi.org/10.3390/ma17071617
  12. M. Stechyshyn, A. Dykha, V. Oleksandrenko, M. Kindrachuk, and A. Martyniuk, “Corrosion, electrochemical, and cavitation-erosion properties of titanium and its alloys,” in V. Tonkonogyi, V. Ivanov, J. Trojanowska, G. Oborskyi (editors) Lecture Notes in Mechanical Engineering, Springer, Cham (2025), pp. 617-627. https://doi.org/10.1007/978-3-031-82746-4_55
  13. M. Stechyshyn, O. Dykha, N. Mashovets, V. Lyukhovets, and D. Zdorenko, “Surface hardening of titanium alloy by nitriding in a hydrogen-free environment in glow discharge,” in Advanced and Novel Technologies – Interdisciplinary Collaboration in Materials Science, Springer, Cham (2026), pp. 9-13. https://doi.org/10.1007/978-3-032-00373-7_2
  14. U. Zwicker, Titan und Titanlegierungen, Springer-Verlag, Berlin (1974). https://doi.org/10.1007/978-3-642-80587-5
  15. C. Leyens, and M. Peters, Titanium and Titanium Alloys: Fundamentals and Applications, Wiley-VCH (2003). https://doi.org/10.1002/3527602119
  16. M.J. Donachie, Titanium: A Technical Guide, ASM International, Materials Park, OH (2000). https://doi.org/10.31399/asm.tb.ttg2.9781627082693
  17. M. Peters, J. Hemptenmacher, J. Kumpfert, and C. Leyens, “Structure and properties of titanium and titanium alloys,” in C. Leyens and M. Peters (editors) Titanium and Titanium Alloys, Wiley-VCH (2003), pp. 1-36. https://doi.org/10.1002/3527602119.ch1
  18. G. Lütjering, and J. Williams, Titanium, Springer-Verlag, Berlin (2003). https://doi.org/10.1007/978-3-540-71398-2
  19. М.S. Stechyshyn, N.M. Stechyshyna, A.V. Martynyuk, and M.M. Luk’yanyuk, “Strength and plasticity of the surface layers of metals nitrided in glow discharge,” Mater. Sci., 54, Is. 1, 55-60 (2018). https://doi.org/10.1007/s11003-018-0156-5
  20. Xin Wang, Wenqi Zhao, Tingting Shi, Lijuan Cheng, Suwen Hu, Chunxia Zhou, Li Cui, Ning Li, and P. K. Liaw, “A review on tribological wear and corrosion resistance of surface coatings on steel substrates,” Coatings, 15, Is. 11, Art. no. 1314 (2025). https://doi.org/10.3390/coatings15111314
  21. Sahoo Sambit Kumar, Devi Pukhrambam Sushma, Jena Sanketa, Laha Soumyadeep, and Swain Bibhu Prasad, “Investigation of microstructural, chemical bonding and optical properties of Fe-Cu/rGO nanocomposites,” J. of Alloys and Metallurgical Systems, 5 (2024). Art. no. 100053. https://doi.org/10.1016/j.jalmes.2023.100053
  22. S. Lavrys, I. Pohrelyuk, J. Padgurskas, and Kh. Shliakhetka, “Improving wear resistance of highly porous titanium by surface engineering methods,” Coatings, 13, Is. 10 (2023). Art. no. 1714. https://doi.org/10.3390/coatings13101714
  23. I.M. Dmytrakh, “Determination of cyclic crack growth resistance of structural materials in a corrosive environment taking into account the electrochemical conditions at the crack tip,” [in Russian] PhD degree thesis, Lviv (1982).
  24. H.V. Karpenko, Influence of Environment on Strength and Durability of Metals [in Russian], Naukova Dumka, Kyiv (1976).
  25. B.I. Kostetsky, Friction, Lubrication and Wear in Machines [in Russian], Technika, Kyiv (1970).
2026 year
2025 year
2024 year
2023 year