Regularities of obtaining highly adhesive filled polymer-monomer compositions

Keywords

methylmethacrylate, polyvinylpyrrolidone, copolymer, polymer-silicate filler.

Cite as

Masiuk A. S., Levytskyi V. Ye., Bilyi L. M., Levytskyi B. V., and Humenetskyi T. V. Regularities of obtaining highly adhesive filled polymer-monomer compositions. Physico-chemical Mechanics of Materials. 2024. 60(1), 128-132.

https://doi.org/10.15407/pcmm2024.01.128

Abstract

The influence of the nature of modified fillers (Ni- and Cu-containing polymer-silicate materials) on the kinetics of emulsion polymerization of methylmethacrylate in the presence of polyvinylpyrrolidone graft copolymers was investigated. The features of polymer formation of polymethylmethacrylate materials depending on the nature of the filler and process conditions are considered. The polymerization process occurs through several stages and is characterized by an induction period. High surface hardness and Vicat softening point characterize the developed materials obtained based on filled compositions.

References

1. R. Goseki, and T. Ishizone, “Poly(methyl methacrylate) (PMMA),” in: Encyclopedia of Polymeric Nanomaterials, Springer, Berlin (2015). https://doi.org/10.1007/978-3-642-29648-2_244
2. Manish Kumar, Poly(methyl methacrylate) (PMMA) Nanocomposites, Lambert Academic Publ., London (2023).
3. Umar Ali, Khairil Juhanni Bt. Abd Karim and Nor Aziah Buang, “A review of the properties and applications of poly(methyl methacrylate) (PMMA,), Polymer Rev., 55, Is. 4, 678-705 (2015). https://doi.org/10.1080/15583724.2015.1031377
4. Fen Ran, Shengqiang Nie, Weifeng Zhao, Jie Li, Baihai Su, Shudong Sun, and Changsheng Zhao, “Biocompatibility of modified polyethersulfone membranes by blending an amphiphilic triblock co-polymer of poly(vinyl pyrrolidone)-b-poly(methyl methacrylate)-b-poly(vinyl pyrrolidone),” Acta Biomaterialia, 7, Is. 9, 3370-3381 (2011). https://doi.org/10.1016/j.actbio.2011.05.026
5. W. S. Hussain, J. K. Oleiwi, and Q. A. Hamad, “Mechanical properties of PMMA-based biocomposites with polyamide and polyvinylpyrrolidone blends for denture applications,” J. of Composite and Adv. Mater., 33, Is. 5, 293-302 (2023). https://doi.org/10.18280/rcma.330503
6. Zinah Alabdali, Mary Reiter, Jennifer Lynch-Branzoi, and Adrian Mann, “Compositional effects on mechanical properties and viscosity in UDMA-MMA blends,” J. of Adhesion Sci. and Technol., 35, Is. 6, 610-625 (2021). https://doi.org/10.1080/01694243.2020.1816779
7. S. G. Al Nakash, “Effect of incorporation of poly vinyl pyrrolidone on transverse strength, impact strength and surface roughness of autopolymerizing acrylic resin,” Tikrit J. for Dental Sci., 2, 137-144 (2012). https://doi.org/10.25130/tjds.2.2.9
8. V. Levytskyi, D. Katruk, A. Masyuk, M. Bratychak, and N. Chopyk, “The effect of poly(vinyl chloride) modifier and filler nature on properties of polyester composites,” Chemistry and Chemical Technol., 12, Is. 1, 53-57 (2018). https://doi.org/10.23939/chcht12.01.053
9. Adnan Hamad Q, “Study of flexural and impact properties of nanohybrid composites materials by using poly methyl methacrylate (PMMA) matrix,” J. of Eng. and Sustainable Development, 23, Is. 3, 114-127 (2019). https://doi.org/10.31272/jeasd.23.3.9
10. V. E. Levyts’kyi, D. S. Katruk, V. V. Kochubei, L. М. Bilyi, and А. S. Masyuk, “Influence of polyvinylchloride on the chemical and thermal resistance of highly filled polyester composites,” Mater. Sci., 53, No. 3, 385-391(2017). https://doi.org/10.1007/s11003-017-0086-7
11. V. E. Levyts’kyi, А. S. Masyuk, Т. Bialopiotrowicz, L. М. Bilyi, and T. V. Humenets’kyi, “Morphology and properties of thermoplastic composites with modified silicate fillers,” Mater. Sci., 54, No. 1, 48-54 (2018). https://doi.org/10.1007/s11003-018-0157-4
12. P. Franco, and I. De Marco, “The use of poly(N-vinyl pyrrolidone) in the delivery of drugs: A Review,” Polymers (Basel), 12, Is. 5, 1114-1143 (2020). https://doi.org/10.3390/polym12051114
13. O. V. Suberlyak, V. E. Levitski, V. Y. Skorokhoda, and A. B. Godij, “Physical-chemical fenomena on phase boundary vinyl monomer-water solution of polyvinylpyrrolidone,” Ukrainskij Khimicheskij Zhurnal [in Russian], 64, Is. 5-6, 122-126 (1998).
14. U. Khromiak, V. Levytskyi, K. Stepova, and A. Tarnawsky, “Synthesis and properties of adhesive polymer-methylmethacrylate materials,” Int. J. of Polymer Sci., 1-9 (2018). https://doi.org/10.1155/2018/4905304
15. V. Levytskyi, A. Masyuk, D. Katruk, and M. Bratychak, “Regularities of obtaining, morphology and properties of metal-containing polymer-silicate materials and polyester composites on their basis,” Chemistry and Chemical Technol., 10, Is. 1, 35-40 (2016). https://doi.org/10.23939/chcht10.01.035
16. V. E. Levytskyi, A. S. Маsyuk, L. М. Bilyi, T. V. Humenetskyi, and A. М. Shybanova, “Influence of silicate nucleation agent modified with polyvinylpyrrolidone on the morphology and properties of polypropylene,” Mater. Sci., 55, No. 4, 555-562 (2020). https://doi.org/10.1007/s11003-020-00338-9
17. S. Devikala, D. Ajith, P. Kamaraj, and M. Arthanareeswari, “Structural morphological and electrochemical studies on PMMA/PVP blends,” Materials Today: Proc., 14, 630-639 (2019). https://doi.org/10.1016/j.matpr.2019.04.186
18. M. E. Mehdi, and A. S. Khaleel, “Mechanical and thermal (polymethylmethacrylate/polyvinylpyrrolidone) blend use in denture material,” Int. J. of Health Sci., 6, Is. S7, 3621-3628 (2022). https://doi.org/10.53730/ijhs.v6nS7.12647